多头伺服拧紧设备

项目简介Project  Profile

   1.此项目为多头锁螺丝工序，采用精密导向杆做导向支撑，8把力士乐螺丝枪。整个过程自动完成，过程扭力监控，异常压力报错，保证产品品质。

     This system is a multi-head screw locking process, with an 8-set Rexroth tightening system. It is supported and oriented by a precision guide rod.  The entire process is completed automatically and features torque monitoring and abnormal pressure error reporting, helping to ensure product quality.

   2.替代目前产线人工两把螺丝枪手动对位，人工压紧进行锁紧作业。降低了劳动强度，提高了安全和生产效率，避免了繁琐过程对产品质量造成的偏差。

     This system was designed to replace the current production line that the positioning and locking work of two screw drivers were done manually. It reduces labor requirements, improves safety and production efficiency. It also minimizes any deviation of product quality caused by manual processes.

  3.产品换型采用Novotechnik传感器监控保证换型的正确性。

     Product replacement is monitored by a Novotechnik sensor to ensure accuracy.

  4. Process:     Part lift up;

                            Screwing cylinder down;

                            Screwing (by Rexroth SB350).